$3,699.00
Model #BJK11106
Baja Kits Prerunner Suspension Kit excels in the dirt while retaining excellent on-road handling and comfort. The kit is a direct bolt-on to your 2WD Chevy Silverado.
Engineered to be a complete mid travel suspension system, it uses Trophy Truck grade uniballs and hardware on both the Upper and Lower arms.
Heavy duty fabricated steel arms handle the abuse while custom tuned King coilover shocks with remote reservoirs and compression adjusters for precise tuning handle suspension damping. (Rear kits available too).
The Baja Kits Advantage:
Technical Specs:
Product Requirements:
Attention You may run 35 inch tires with stock fenders for mild use Only.
35 inch tires will clear under normal driving conditions and Will contact your stock fender at full compression (AKA jumping the truck, hitting bumps or driveways at speed)
The owner accepts the risk of damaging the stock fenders in this scenario.
Parts Included:
Kits come pre assembled and ready for install
Additional Items
Install Information:
12.5 inch of wheel travel; 2.5 inch wider per side; 0-4 inch of lift adjustable for the low Prerunner look and more stable handling Shocks Sold Separately
Billet Shock Plate is ONLY included with the Purchase of the Custom King 2.5 Coilovers
Stamped Steel, Aluminum, and Forged Steel Control Arms
For the 2014-2016 Chevy Silverado and GMC Sierra 1500 trucks, GM offered three different upper control arms: stamped steel, aluminum, and forged steel. Additionally, in 2014-2016 GM truck had two different knuckles—aluminum and steel—each with different ball joint hole sizes.
Stamped steel and aluminum arms have a larger ball joint that fit the same knuckle. Steel knuckles with forged steel control arms had smaller ball joint holes that match the cast steel arms only.
This is the same setup found on 2007-2014 models. Forged steel and forged aluminum arms have retention clips on the ball joint so if the ball joint cup becomes distorted, it does not fail.
New Stamped Steel Arm Design
The NEW stamped steel arms have a ball joint that is sandwiched between the upper and lower pieces of the arm with a relatively small surface area for ball joint retention with no supporting clips. If these cups distort, the ball joint fails and falls out.
GM 1500 trucks built after April 1, 2016 are stamped steel arms mated to smaller steel knuckles with the larger of the two ball joints. Basically, they are using the larger ball joint from the aluminum arm and putting it in a stamped arm and mating it to a smaller steel knuckle.
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2014-2018 Chevrolet Silverado 1500 |
Silverado 1500 | 2014-2018 | |||
|
2014-2018 GMC Sierra |
Sierra | 2014-2018 |
Offroading has become one of the most popular automotive activities over the last few years. More enthusiasts are engaging themselves and their vehicles in places where no ordinary cars can go through. Because of this, they require parts that would turn their vehicle into a worthy offroad machine. It is where Baja Kits comes in.
The company is owned and operated by brothers Jordan and Jonathan Brenthel, who are avid offroad enthusiasts themselves. Baja Kits lives and breathes offroad racing. Its parent company, Brenthel Industries, builds and maintains Championship Baja race vehicles, offers race support, and designs some of the most superior offroad racing parts available on the market. Using its experience in building championship-winning race vehicles, they have become one of the go-to brands when it comes to quality offroading parts.
Baja Kits has been constructing championship-caliber parts since 2005. In order to create superior products, the company uses the latest engineering and manufacturing technology and applies it to old-world techniques. Using state-of-the-art equipment also enables them to achieve a perfect finished product with a factory-like fit.
Based in Southern California, their facility is equipped with only the latest cutting-edge technology and equipment that other manufacturers envy. What’s more is that Baja Kits employs highly skilled designers and welders with decades of experience under their belts.
That combination is the secret sauce behind Baja Kits’ high-quality parts that exceed even its own highest standards. The dedication and innovation behind the brand are the reasons why it has earned the title of being one of America’s top offroad product manufacturers.
Baja Kits products are like no other. The process starts with CAD files directly given by some of the top automotive manufacturers such as Ford, Chevy, and Jeep. They then build around it and clock countless hours to develop the best geometry possible, enabling them to produce products that we know of today.
The designers then formulated a product with the same design and engineering that Baja has used with its Trophy truck and Class 1 racecar, which can be utilized for extreme offroad usage or daily driving.
The company is best known for its boxed upper and lower control arms that boast strength and aesthetics. Baja Kits ensures that they create the best possible product for the consumer. Their kits are designed to aesthetically improve the look of your vehicle and its overall drivability and performance.
If you want to take your vehicle to the next level and test its offroad prowess, then Baja Kits has what you need. We carry Baja leveling kits for different vehicles ranging from a Toyota FJ Cruiser to a Ford Raptor and Chevy Colorado.
To know more about what Baja Kits has to offer, visit Vivid Racing and check out their list of products that fit your specific requirement. Call one of our parts specialists today at (480) 966-3040.
