The Rywire B-Series Fueltech 550 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!
If you are building a Front (or all) wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The Fueltech EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.
*THESE HARNESSES ARE PRIMARILY EQUIPPED FOR THE FT550 & FT600; IF YOU'RE USING AN FT450 YOU WILL HAVE A LOT OF EXTRA CONNECTORS THAT WILL NOT BE USED.*
Pre-terminated for:
COMPUTER Plug Selections: Fueltech 550
Programming Cable Ethernet, or UBS depending on computer choice
Lambda/ Uego FuelTech computers require a NANO wideband unit with wire harness. Our powered CAN plug can interface with the NANO subharness quite easily.
AIR TEMP AEM
OIL TEMP AEM
Fuel Pressure AEM
Oil Pressure AEM
Exhaust Backpressure (EMAP) AEM
Manifold Pressure (MAP) AEM
Throttle Position (TPS) Factory Honda K series
Coolant Sensor (ECT) Factory Honda K series
VTEC Factory Honda (2002+)
Speed Sensor (VSS Hydro) Factory Honda K series
Reverse Lights Factory Honda (2002+)
Starter Trigger Factory Honda
Coils Factory Honda K-series (Smart Coils)
Ground Ring Terminals for Coils and Computer Factory Honda
Knock Sensor Bosch 0261231188 (2 wire EV1)
Alternator Factory Honda (OBD0/1 or OBD2 styles available) Default is OBD2 (1996+)
Injectors (8 Injector) Bosch EV14 Default (ID 1050X)
Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit) DTM 2 pin
FLEX FUEL capable Rywire (Rywire flex fuel kit ) If wired into AUX connector.
12 pin Engine Bay AUX expansion (Contains power, 5V, sen ground, CAN, and 6 AV/DIG inputs) 5 pin Cabin AUX expansion (Contains 5V, sen ground, and 3 AV/DIG inputs)
Trigger (CAM/CRANK) K series RSX (2002+)
DBW (Drive-By-Wire) capable We can create AUX expansion to wire in the DBW T.B. and Pedal
CAN BUS connectivity Powered CAN (connects devices such as loggers, dashes, and gauges)
Our Fuel Tech engine harness is designed to accept: -T1 Race Development (cam trigger) Plugs directly into loom labeled "Trigger"
Chassis adapter options:
This harness can plug and play into any chassis This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.
The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!
WARNING: Cancer and Reproductive Harm
