VTT M14/M12 Titanium Wheel Stud Kits Full M12x1.5 Burnt 20pcs

Looking to convert your 5×112 M14x1.50 VAG vehicle to 5×114 to open up your wheel options? Want to drop 60% of the weight off steel options? We got covered with our VTT TITANIUM wheel stud conversion kits. These kits are Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength, with Grade 5 Titanium nuts with a 60-degree cone seat to fit most all aftermarket wheel applications and convert your vehicle to M12x1.5 wheel studs which allow you to fit 5×114 wheels with no other changes.

No wobble bolts or redrilling here. Simply install the studs, put the wheel on, and lug nuts will center the wheel

We offer these in one length These are 75″ total length, with 53″ shank length. This kit is BURNT TITANIUM, and we offer it in 10 or 20 pieces if you want to only do the front/rear or both.

Included in every kit:

• 10 or 20 Titanium M14x1.5 to M12x1.25 conversion Wheel studs
• 10 or 20 Titanium M12x1.5 19mm opened-ended lug nuts

• Apply lock tite to the studs (short thread end) and torque to 20 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles
• Do not use any hub chub-centeringves with these conversion studs, the lugs will center the wheels. the use of a centering sleeve may lead to studs breaking. for installation, you must snug each lub up slowly, and in a star, pattern to get the wheel centered on the lugs, failure to do so can also lead to failure.